
Kyosho 1/8 Inferno GT2 Challenger Demon Nitro 4WD RTR
This is the Glow Powered, 2.4GHz Radio Controlled, Ready to Run,
1/8 scale 2018 Spec Inferno GT2 Dodge Challenger SRT DEMON
Race Spec On-Road Car.
FEATURES
Chassis: Aluminum, with resin chassis stiffener, front center
gravity type radio box for improved stability
Drive: Four wheel shaft drive
Transmission: Two-speed
Differentials: Spiral type ring & pinion gear
Radio: Kyosho Syncro KT-331P FHSS transmitter with jog dials, 15
mode memory, endpoint adjustment, dual-rate and exponential
settings, KR331 receiver
Steering Servo: High torque KS5031-09MW metal-geared servo
Engine: Kyosho KE25 with pull starter, slide valve carburetor, rear
exhaust
Exhaust System: Polished aluminum tuned pipe
Clutch: 3-piece, 1.3" (34mm) small flywheel for sharp throttle
response
Wheels: Five spoke, black in color
Tires: On road 3.8 x 1.6" (97 x 40mm) with foam inserts
Brake: Front and rear independent disc
Fuel Tank: 5.1oz (150cc)
Front Bumper: Foam
Shocks: Oil-filled
Shock Towers: Composite plastic, 0.197" (5mm) thick
Ball Bearings: Full set, 18 on drive train and 2 on clutch bell
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
INCLUDES
Assembled Dodge Challenger SRT DEMON, w/trimmed & painted Body, KE25
Engine, Tuned Pipe, Radio System, Wrenches and Instruction Manual
REQUIREMENTS
AA Batteries: Eight, four for transmitter, four for receiver
Fuel: Car blend with 15-30% nitro content, 20% required for break-in
Glow starter, track and maintenance equipment
SPECIFICATIONS
Vehicle;
Length: 20.3" (515mm)
Width: 12.2" (310mm)
Height: 5.3" (135mm)
Wheelbase: 14.2" (360mm)
Front Tread: 10.3" (262mm)
Rear Tread: 10.4" (265mm) distance from center of tires side-to-side
Ground Clearance: 0.59" (15mm)
Gear Ratio: 1st 10.14:1, 2nd 7.90:1
Weight: 8.04lbs (3650g)
Body;
Length: 25.4" (646mm)
Width: 11.6" (294mm) measured at center between wheel wells
Height: 6.2" (157mm)